5G Router & Industrial Ethernet Switch
Overview
This 5G Router & Industrial Ethernet Switch communication route is specially designed and developed for the application of power high-speed communication network, using 5G industrial security module and domestic two-layer switching chip.
The dual uplink scheme of optical fiber and 5G is realized, which can effectively reduce the wiring difficulty and maintenance cost of distribution automation business site, and the optical fiber uplink can ensure the stability and reliability of data transmission. It provides a high-end industrial Ethernet communication solution for flexible power and industrial application requirements, breaks through the bottleneck of 100M backbone network communication, makes power communication smoother, more reliable and faster, and meets the continuous innovation needs of customers to improve value-added applications.
This communication route can be used for simple application mode of plug and play, and also for complex network management mode, so as to meet various needs of users. All electrical ports support auto-negotiation, 10/100/1000Mbps full-duplex and half-duplex, flow control, Auto-MDI/MDI-X and other functions. Through Web management or SNMP management, this communication route can provide advanced management functions, such as ring network protection, virtual local area network, Trunk, Quality of Service, IGMP Snooping, rate control, port mirroring, static MAC address forwarding table, diagnostic function, Email/Relay fault alarm and firmware online upgrade, and a series of common advanced management functions.
This communication route has 8 10/100/1000Mbps adaptive electrical ports, 4 Gigabit optical ports with 12 ports and 1 5G interface. Each gigabit optical port supports SFP optical port module, the product supports VLAN of 802.1Q, the minimum granularity supported by port speed limit is 64K, and the MAC address table of 8K entries is supported.
Network Features
- Support 8x10/100/1000Mbps RJ45 Ports, 4 x 1.25G SFP ports and 1 x 5G uplink.
- Gigabit interface 10/100/1000Mbps adaptive, full/half duplex, MDI/MDIX adaptive mode.
- Support QoS, IEEE802.1p and ToS/DiffServe to improve communication quality.
- Support different levels of network management of SNMP V1/V2C.
- Real-time broadcast storm monitoring and control (including broadcast, multicast, unknown unicast and other storm type detection)
- Embedded Web server, which can be managed and configured remotely through browser.
- Dynamic IGMP Snooping support to filter multicast traffic.
- Meet the requirements of trouble-free operation in strong electromagnetic interference environment.
- Full duplex flow control and half duplex back pressure flow control
- Port VLAN and IEEE 802.1Q VLAN
- Trunk port convergence
- Online firmware update
Application Features
- Bandwidth management
- 5G automatic networking
- Backup and recovery of system configuration parameters
- Friendly graphical interface, supporting one-button factory settings recovery.
- Support port mirroring for online debugging.
- An Effective Network Diagnosis Tool
- Power failure and broken fiber storm alarm
- Fast recovery of port changeover connection
- Real-time network time synchronization
- Restrict IP access and manage communication routes in the network.
Specifications
| Ethernet |
| Appearance and heat dissipation | | Size | 74mm * 160mm * 122mm | | Material | Aluminum Alloy | | Cooling mode | No fan, silent | | Mounting option | DIN Rail | | Power supply and environment | | Power input | DC12V/24V/48V | | Power port | 5-pin Terminal Block, Redundant Power | | Power consumption | less than 20W | | Humidity | 5% ~ 95% without condensation | | temperature grade | industrial grade, -40 ~ 85℃ | | Protection level and availability | | Protection level | EC/EN6100-4 industrial protection | | MTBF | > 50000 hours | | Connectors | | Gigabit Ethernet Port | 8 x 10/100/1000Mbps | | Gigabit Fiber Port | 4 x 1000BASE-X | | 5G antennas | 2 | | Console Port | 2 | | Other | 1 x USB, 1 x SIM, 1 x Reset | | operating system | | Operating system | Linux | | Online upgrade | support | | management | Web-based network management | | Switch protocols and functions | | Remote access control | support | | Standard protocols | IEEE802.3u, IEEE802.1p, IEEE802.1q and IEEE 802.3ad | | Multicast | supports IGMP and IGMP Snooping multicast protocols. | | VLAN | supports VLAN division. | | QoS | supports QoS management. | | Ports | Supports port aggregation, port rate limitation and broadcast storm suppression. | | IPv | supports IPv4 static routing settings | | ACL | supports port MAC address binding | | Ring network protection | supports | | Port mirroring | supports | | 5G Features | | NR features | supports SA/NSA networks. | | 4G/5G | automatic switching between different 4G/5G networks. | | Modulation mode | uplink and downlink 256QAM | | cryptographic algorithm | supports | | 5G output power | N41: 23dBm±2dB N78: 23dBm+2dB/23dBm-3dB N79: 23dBm+2dB/23dBm-3dB | | receiving sensitivity | N41: 2 antenna 10mhz/30khz SCS <-95.1dbm N78: 2 antenna 10mhz/30khz SCS <-96.1dbm N79: 2 antenna 40mhz/30khz SCS <-89.7dbm | | LED | | Function | LED | Status | Definition | | Power | PWR1 | ON | PWR1 is connected and supplied normally. | | OFF | PWR1 is not connected or the power supply is abnormal. | | PWR2 | ON | PWR1 is connected and supplied normally. | | OFF | PWR1 is not connected or the power supply is abnormal. | | RUN | RUN | Flashing | system is operating normally. | | ON/OFF | Abnormal system operation | | Alarm | ALM | ON | Equipment alarm | | OFF | Equipment without alarm | | Gigabit Fiber Port | G9 ~G12 | ON | The port has established a valid network connection. | | Flashing | The port has network activity. | | OFF | The port has not established a valid network connection. | | Each Ethernet RJ45 port has two indicators, the yellow indicator is the port rate indicator and the green indicator is the connection status indicator. | | Ethernet Port | 1000M (Yellow) | ON | 1000M working state | | OFF | 10M/100M working state | | L/A | ON | The port has established a valid network connection. | | Flashing | The port has network activity. | | OFF | The port has not established a valid network connection. | |
Order Information
| Model | Description |
| LNK-IMC408G-5G-R | 5G Router & Industrial Ethernet Switch communication route, with 8x10/100/1000Mbps RJ45 Ports, 4 x 1.25G SFP ports and 1 x 5G uplink. |
|
|
5G Router & Industrial Ethernet 1000M Switch 8*1000M RJ45+ 4*1.25G SFP+ 1*5G uplink Images
|
